2015 Display Table Design Thread
Moderator: JamesPerrin
- PaulBradley
- Staring out the window
- Posts: 21223
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: 2015 Display Table Design Thread
Good start!
Looking again at the original rough layout, will the decreased depth affect it at all? And, given that we only have the one ship, should we have less 'water' space?
Looking again at the original rough layout, will the decreased depth affect it at all? And, given that we only have the one ship, should we have less 'water' space?
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
Re: 2015 Display Table Design Thread
I have a suitable scale 3-masted mishap of a sailing ship that I am going to do a cunning cobble and hopeful recovery on, from the mess of a paint job it currently sports, starting tomorrow. It will not be rigged with all the lines and block/tackle that I generally use, but it will have the simplistic basic level of rigging that Airfix/Revell/whoever generally offer with a kit. and I will cut/hack/chew the bottom of it off, so that it sits as a waterline
Trying to Build kits and not Buy kits
- PaulBradley
- Staring out the window
- Posts: 21223
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: 2015 Display Table Design Thread
Cool - what kit?
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
-
- NOT the sheep
- Posts: 26194
- Joined: November 26th, 2011, 6:11 pm
- Location: Pontefract West Yorkshire
Re: 2015 Display Table Design Thread
That's a neat fit of the baseboards into the car Al. The time is now fast approaching when will will have to give thought as to how much is going to fit on there - for instance have you planned for a separate module for the dockyard scene because there is at least one quite large E-Boat sized vessel under construction.
Doing - Tamiya 1/35th Universal Carrier.
Work is the curse of the modelling classes!
IPMS#12300
Work is the curse of the modelling classes!
IPMS#12300
- beany
- Fat git, glasses, goatie - Avoid!
- Posts: 4336
- Joined: April 6th, 2011, 11:05 am
- Location: Chellaston, Derby
Re: 2015 Display Table Design Thread
The layout will still be as per this diagram - I am taking responsibily for the middle section with the track on, so the parts to either side will be up to others to populate.ShaunW wrote:The time is now fast approaching when will will have to give thought as to how much is going to fit on there - for instance have you planned for a separate module for the dockyard scene because there is at least one quite large E-Boat sized vessel under construction.
Tom and Chris' boat will be to the left of the dockside cranes and so this expanse of water can be as wide or narrow as we see fit. If anyone wants to add another board the other side of the water, i.e to the far left, hence making it more of a canal, then that's fine but just remember it will have to stand approx 25mm above the table surface to match the main board. Also, I'll need to know about it sooner rather than later to plan the rest of the table space.
Also, for now I am envisioning the light blue table clothes we've been using will pass off as the "water" unless anyone want to do something more ambitious.
For the right hand end, there was mention of using the green grass mats that are available for rail modellers etc. but I don't know if we have a hard pledge from anyone to provide this - my apologies if I've missed that. If not then they will be standing on the light blue table cloth as well. This is where I see Paul's and any other planes standing (and the control tower). This width will be variable depending on how much is taken up by the dockyard/canal on the day.
Once the primer is dry on the boards - it's taking forever - and I have laid the track I can ascertain how much room there is either side for the dockyard and the airfield once the garage, churchyard, remembrance day scene etc. (that I now have in my possession) have been placed.
By next weekend I would expect to be firming up on these details and seeing the final plan come together.
The time for "we could do this" or "we could do that are over". As I see it, you've either built it or are currently in the process of building it, and so I can allocate the space for it, or it isn't likely to happen now.
Having said that, the whole thing is still a joint effort and so everyone who is there on Friday afternoon for set up at Telford will have the opportunity to fine tune and move thing about without me necessarily stabbing them in the back of the hand with an X-Acto knife - probably!
Cheers
Al.
2024 Acquired: 9 Built: 1
- TomW
- Modelling Gent and Scholar
- Posts: 2279
- Joined: May 1st, 2011, 8:09 am
- Location: Devizes, Wiltshire
Re: 2015 Display Table Design Thread
I'll provide the green grass mat for that section Al plus roads and hedges as I said at Farnboroughbeany wrote:For the right hand end, there was mention of using the green grass mats that are available for rail modellers etc. but I don't know if we have a hard pledge from anyone to provide this - my apologies if I've missed that. If not then they will be standing on the light blue table cloth as well.
Regards
Tom
Veni, Venari, Vamoosi
Coastal Command SIG Leader 2012 - 2016
We'll call him Dinghy Watts...... - Paul Bradley
2016 A:B = 29:11
2015 A:B = 38:14
2014 A:B = 25:9
2013 A:B = 20:17
2012 A:B = I didn't keep score
2011 A:B = 39:11
2010 A:B = 51:10
Coastal Command SIG Leader 2012 - 2016
We'll call him Dinghy Watts...... - Paul Bradley
2016 A:B = 29:11
2015 A:B = 38:14
2014 A:B = 25:9
2013 A:B = 20:17
2012 A:B = I didn't keep score
2011 A:B = 39:11
2010 A:B = 51:10
-
- NOT the sheep
- Posts: 26194
- Joined: November 26th, 2011, 6:11 pm
- Location: Pontefract West Yorkshire
Re: 2015 Display Table Design Thread
OK, I'm wit cho' ass. Indeed, we will now have to start firming this up and those side modules for the airfield and the dockside will need thought. If I'm right, a fair bit of the airfield stuff may well be t'other side of the pond to be shipped over by Paul.
Thinking aloud, I'll take a look through the build threads with a view to compiling a "where we are now" thread or similar so builds/time estimates for completion/shipping etc can be seen at a glance. Let me give my brain a workout.
Thinking aloud, I'll take a look through the build threads with a view to compiling a "where we are now" thread or similar so builds/time estimates for completion/shipping etc can be seen at a glance. Let me give my brain a workout.
Doing - Tamiya 1/35th Universal Carrier.
Work is the curse of the modelling classes!
IPMS#12300
Work is the curse of the modelling classes!
IPMS#12300
- PaulBradley
- Staring out the window
- Posts: 21223
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: 2015 Display Table Design Thread
I've been working on the control tower this morning; we'll have that and the little club house, building-wise, for the airfield. I have two aircraft complete and two others that I anticipate will make the trip. I also have a few figures and a Land Rover (ex-Bloodhound) to help populate the open spaces. Tom is working on a couple of other airfield vehicles.
Somewhere in our amassed past project model bank is the Airfix ambulance that I made for the Airfix 1976 display - we could, perhaps, use that on the airfield. Also, if we are still going to have the 'tank museum', there are a small number of suitable armoured vehicles in our model bank, including my Matchbox Comet. I know we prefer to use all-new models for our displays, but these might help to bulk out the display.
Somewhere in our amassed past project model bank is the Airfix ambulance that I made for the Airfix 1976 display - we could, perhaps, use that on the airfield. Also, if we are still going to have the 'tank museum', there are a small number of suitable armoured vehicles in our model bank, including my Matchbox Comet. I know we prefer to use all-new models for our displays, but these might help to bulk out the display.
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
Re: 2015 Display Table Design Thread
You don't have the rememberance day board. I brought it to show and took it home. It needs a gap 10inch x 10inch. You do have everything else I had done/built at that time. I now have the second crane - built, and am working at cobbling something together with a 3-masted little ship.
With time marching on and the days counting down - I will just re-say : if anyone has something that is started and will struggle to finish or that has not yet been started but needs to be .... let me know and if it gets to me soon there is a chance I can get it done over next couple weeks. I have time available to do things.
With time marching on and the days counting down - I will just re-say : if anyone has something that is started and will struggle to finish or that has not yet been started but needs to be .... let me know and if it gets to me soon there is a chance I can get it done over next couple weeks. I have time available to do things.
Trying to Build kits and not Buy kits
- beany
- Fat git, glasses, goatie - Avoid!
- Posts: 4336
- Joined: April 6th, 2011, 11:05 am
- Location: Chellaston, Derby
Re: 2015 Display Table Design Thread
That's great Tom - and don't forget those sexy little road signs you brought.TomW wrote:I'll provide the green grass mat for that section Al plus roads and hedges as I said at Farnborough
Whoa, easy TigerShaunW wrote:OK, I'm wit cho' ass.
That would be great Shaun, I appreciate the effort.Thinking aloud, I'll take a look through the build threads with a view to compiling a "where we are now" thread or similar so builds/time estimates for completion/shipping etc can be seen at a glance.
I'm really excited about the airfield and your contributions Paul, can't wait to see them. Do you have any idea who has the models in "the bank" Paul; I certainly haven't?PaulBradley wrote:Somewhere in our amassed past project model bank is the Airfix ambulance that I made for the Airfix 1976 display - we could, perhaps, use that on the airfield. Also, if we are still going to have the 'tank museum', there are a small number of suitable armoured vehicles in our model bank, including my Matchbox Comet. I know we prefer to use all-new models for our displays, but these might help to bulk out the display.
Oh yeah Chris, I forgot about that, but I'll cut out a 10 x 10" template to allow for it on the baseboard.chrism wrote:You don't have the remembrance day board. I brought it to show and took it home.
Sounds like it's all coming together guys, many thanks.
Al.
2024 Acquired: 9 Built: 1
- JohnRatzenberger
- Why is he so confused ?
- Posts: 15740
- Joined: April 5th, 2011, 3:42 pm
- Location: Living on a sandbar - Nags Head, NC.
Re: 2015 Display Table Design Thread
I am on track to be putting my stuff (double long train shed, 5 coaches) in the post 16-19 Oct.
Need mailing address soonest so I can go check what options I have.
I'll do a thread photo update next day or so.
Need mailing address soonest so I can go check what options I have.
I'll do a thread photo update next day or so.
John Ratzenberger
It's my model and I'll do what I want with it.
It's my model and I'll do what I want with it.
- PaulBradley
- Staring out the window
- Posts: 21223
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: 2015 Display Table Design Thread
Same as John, I'll need to know who I'm mailing to. I have a long weekend over the 16-18 to finish up, so I'd like to send them out on the 19th. That gives just over 2 weeks for transit.
Al, I don't know who is currently holding previous years' models - Tom and James might know.
Al, I don't know who is currently holding previous years' models - Tom and James might know.
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
- beany
- Fat git, glasses, goatie - Avoid!
- Posts: 4336
- Joined: April 6th, 2011, 11:05 am
- Location: Chellaston, Derby
Re: 2015 Display Table Design Thread
I don't want to be transporting anyone elses models this year due to the space already taken up by the baseboard and the models I already have from Chris and my own for CBK and other SIG tables at Telford. Would someone kindly volunteer to receive John and/or Paul's models from across the pond please - obviously with a view to getting them to Telford for both days.
Cheers
Al.
Cheers
Al.
2024 Acquired: 9 Built: 1
Re: 2015 Display Table Design Thread
Well, I'm 99.5% certain of attending, going down on Friday and staying until Sunday, and the car's plenty big enough... Paul's already got my Shipley address, and I can send it over to John...
bestest,
M.
bestest,
M.
-
- NOT the sheep
- Posts: 26194
- Joined: November 26th, 2011, 6:11 pm
- Location: Pontefract West Yorkshire
Re: 2015 Display Table Design Thread
You're potentially a life saver Matt. Unfortunately I'm almost certain I won't be able to attend on Friday due to work issues - the company is in the poo - if it goes belly up by the end of the month and I'm on the dole then my attendance won't be an issue - but in the meantime it has to be all hands on deck and as I'm one of the senior people....... If there are any issues then I am certainly willing to take delivery of builds via my in-laws. Please let me know if that will be required. I will be there first thing on Saturday.mattbacon wrote:Well, I'm 99.5% certain of attending, going down on Friday and staying until Sunday, and the car's plenty big enough... Paul's already got my Shipley address, and I can send it over to John...
bestest,
M.
Doing - Tamiya 1/35th Universal Carrier.
Work is the curse of the modelling classes!
IPMS#12300
Work is the curse of the modelling classes!
IPMS#12300