Paul's Attempts
Re: Paul's Attempts
Here is my build of the 3R model Stryker in 1/72 scale. It is a nicely detailed kit and was fun to build.
I did buy aftermarket wheels because I did not like the rubber ones in the kit. The new ones looked like they had weight to them, they had better sidewall detail (I like the side wall rib effect) and I think were a big improvement on the kit. I am glad I used them.
Fine cooper wire was used to replace the various handles, add barbed wire and winch cable.
Side straps were made from plastic strip and some stowage courtesy of Apoxie Sculpt.
A coat of paint and dust and I think this is done.
Hope its not too long a post. Thanks for looking.
I did buy aftermarket wheels because I did not like the rubber ones in the kit. The new ones looked like they had weight to them, they had better sidewall detail (I like the side wall rib effect) and I think were a big improvement on the kit. I am glad I used them.
Fine cooper wire was used to replace the various handles, add barbed wire and winch cable.
Side straps were made from plastic strip and some stowage courtesy of Apoxie Sculpt.
A coat of paint and dust and I think this is done.
Hope its not too long a post. Thanks for looking.
Paul
This is it. The moment we should have trained for.
This is it. The moment we should have trained for.
- iggie
- Modelling Gent and Scholar
- Posts: 23438
- Joined: July 31st, 2013, 11:04 am
- Location: North Somercotes, Lincolnshire
- Contact:
Re: Paul's Attempts
That's a great looking build Paul, the detail really pops and your weathering looks spot on
Best wishes
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
- Softscience
- Staring out the window
- Posts: 7492
- Joined: April 5th, 2011, 4:34 pm
- Location: Maryland, near Washington DC
Re: Paul's Attempts
I like the dusty finish a lot. You seem to have captured the scaled down weathering that is so important in 1/72
- Narayan
- If anyone needs me, I'll be in my office
- Posts: 2602
- Joined: April 10th, 2011, 7:01 pm
- Location: The Middle of Nowhere in Ireland
Re: Paul's Attempts
1/72 scale, that's fantastic.
_________________
Narayan
He's experienced about as much pain and suffering as anyone I've encountered, give or take, and he still has Hell to look forward to.
A:B 2024 1:3 2023 28:2 2022 46:09 2021 100:06 2020 113:11 2019 113:16 2018 35:05 2017 28:03 2016 27:10 2015 53:07 2014 21:04 2013 39:12 2012 20:05 2011 11:10 2010 44:12 2009 19:16 2008 16:03 Overall 526:140 Stash 386
_________________
Narayan
He's experienced about as much pain and suffering as anyone I've encountered, give or take, and he still has Hell to look forward to.
A:B 2024 1:3 2023 28:2 2022 46:09 2021 100:06 2020 113:11 2019 113:16 2018 35:05 2017 28:03 2016 27:10 2015 53:07 2014 21:04 2013 39:12 2012 20:05 2011 11:10 2010 44:12 2009 19:16 2008 16:03 Overall 526:140 Stash 386
- Clashcityrocker
- Modelling Gent and Scholar
- Posts: 10832
- Joined: May 1st, 2011, 12:31 am
- Location: Adelaide. South Australia
Re: Paul's Attempts
Looks fantastic.
Nigel
Nigel
- David Silver
- Active Participant
- Posts: 658
- Joined: March 28th, 2022, 11:33 pm
Re: Paul's Attempts
Wow! That is a very highly detailed kit for 1/72 and you've made a brilliant job of it.
- TeeELL
- Modelling Gent and Scholar
- Posts: 11635
- Joined: December 28th, 2015, 4:38 pm
- Location: North Wiltshire
Re: Paul's Attempts
My goodness, that is a terrific model all the more so for being in ‘gentleman’s scale’.
Tony
The older I get the better I was!
Current build:
Airfix 1:72 Javelin FAW9
Particular modelling interests:
Cuban Airforce aircraft, 29(F) Sqn aircraft, Aircraft I’ve flown
The older I get the better I was!
Current build:
Airfix 1:72 Javelin FAW9
Particular modelling interests:
Cuban Airforce aircraft, 29(F) Sqn aircraft, Aircraft I’ve flown
- PaulBradley
- Staring out the window
- Posts: 21223
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: Paul's Attempts
Very nice!
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
- skypirate
- Modelling Gent and Scholar
- Posts: 7303
- Joined: May 1st, 2011, 6:13 am
- Location: Port Macquarie, Australia
Re: Paul's Attempts
I am not an Armour modeller, but I really like the look of that!
Top job!
David
Top job!
David
- Canuck2016
- Active Participant
- Posts: 535
- Joined: March 6th, 2016, 4:03 pm
Re: Paul's Attempts
Great work on the Stryker, Paul! I'm always amazed at the results you get especially considering the small scale. The stowage and the dust effect on the lower hull look amazing! :O
Re: Paul's Attempts
Thanks for the comments on the Stryker. For the next kit I decided to try strange scale. For me at least. My least favorite scale in fact. 1/48. Too small to be impressive in stature like 1/32, but to big to be compact and impressive by being small like my favorite, 1/72 scale. I know opinions may vary!
Anyways, I wanted to try something different so I went with the Tamiya 1/48 scale Matilda in the Caunter scheme. As usual from Tamiya, the kit is beautiful. The engineering and fit is second to none. In fact the issues I had were from my own choices. I chose to build and paint the model in sub sections and this affected the fit of some of the parts. For example I left the side skirts off because of the caunter scheme and painted the primer and base coat I had some trouble getting a nice fit afterward. All my problem. If I had to do it again I would paint inside the mud slides then attach the side skirts, then mask and paint the main body together.
The only addition I did was to add straps to the stowage made out of brass stock and some wires to the smoke dischargers from copper wire.
I had issues with the paint peeling on the turret which was frustrating, but a re-mask and paint fixed this.
Painting was done in single stripe stages meaning I masked one stripe and painted verses all the one colour at the same time. I left the grill at the back as separate pieces to help with getting a good paint line over all the bumps. It was a bit messy at times but it came together. Very, very slowly!
After much gnashing of teeth I was happy with it.
Lastly it was time for the decals.
Next it will be onto the weathering. Sorry for all the photos but i was happy after all the masking work with how the Caunter scheme went together so I went a bit hard on the progress pics.
Cheers,
Anyways, I wanted to try something different so I went with the Tamiya 1/48 scale Matilda in the Caunter scheme. As usual from Tamiya, the kit is beautiful. The engineering and fit is second to none. In fact the issues I had were from my own choices. I chose to build and paint the model in sub sections and this affected the fit of some of the parts. For example I left the side skirts off because of the caunter scheme and painted the primer and base coat I had some trouble getting a nice fit afterward. All my problem. If I had to do it again I would paint inside the mud slides then attach the side skirts, then mask and paint the main body together.
The only addition I did was to add straps to the stowage made out of brass stock and some wires to the smoke dischargers from copper wire.
I had issues with the paint peeling on the turret which was frustrating, but a re-mask and paint fixed this.
Painting was done in single stripe stages meaning I masked one stripe and painted verses all the one colour at the same time. I left the grill at the back as separate pieces to help with getting a good paint line over all the bumps. It was a bit messy at times but it came together. Very, very slowly!
After much gnashing of teeth I was happy with it.
Lastly it was time for the decals.
Next it will be onto the weathering. Sorry for all the photos but i was happy after all the masking work with how the Caunter scheme went together so I went a bit hard on the progress pics.
Cheers,
Paul
This is it. The moment we should have trained for.
This is it. The moment we should have trained for.
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19451
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Paul's Attempts
WOW! that looks excellent!
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
- iggie
- Modelling Gent and Scholar
- Posts: 23438
- Joined: July 31st, 2013, 11:04 am
- Location: North Somercotes, Lincolnshire
- Contact:
Re: Paul's Attempts
Excellent work on the masking Paul; I gave up trying to mask my 1/32nd Matilda a few weeks back and put it back in the box for another time... so you have my admiration for getting all those lumps and bumps masked
Best wishes
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Re: Paul's Attempts
Thanks. To be honest, if you could see all the date time stamps on the photos, you would see quite the space in the sequence! It made its way back and forth from the shelf to the desk several times.
Paul
This is it. The moment we should have trained for.
This is it. The moment we should have trained for.