VTOL SB - ***Finished 10th December***
-
- Modelling Gent and Scholar
- Posts: 4385
- Joined: November 23rd, 2012, 4:20 pm
-
- Modelling Gent and Scholar
- Posts: 4385
- Joined: November 23rd, 2012, 4:20 pm
Re: VTOL SB - 10th December 2017 - 10th December 2018
It's time to awaken the beast:
So after a mess up with the Phantom's white paint(AGAIN!!!!!!) I decided to go at a little mojo fixing project and what do you know the Harrier strikes again.
I only used Micro Set(for the first time, haven't used Sol yet but the decal looks painted on already to the naked eye so I might just not bother!
So after a mess up with the Phantom's white paint(AGAIN!!!!!!) I decided to go at a little mojo fixing project and what do you know the Harrier strikes again.
I only used Micro Set(for the first time, haven't used Sol yet but the decal looks painted on already to the naked eye so I might just not bother!
- DavidWomby
- Modelling Gent and Scholar
- Posts: 11766
- Joined: May 1st, 2011, 8:09 pm
- Location: Florida, USA
Re: VTOL SB - 10th December 2017 - 10th December 2018
That's looking great!
David
David
-
- Modelling Gent and Scholar
- Posts: 4385
- Joined: November 23rd, 2012, 4:20 pm
-
- Modelling Gent and Scholar
- Posts: 4385
- Joined: November 23rd, 2012, 4:20 pm
Re: VTOL SB - 10th December 2017 - 10th December 2018
I suppose this counts as my latest finished kit:
Sealed in its shrink wrap from 1987 Airfix Harrier GR.3, 2 spare fuselage halves and a deep IKEA frame.
My Mrs ended up gluing the fuselage halves in as I couldn't get the correct placement for them.
(Yes dear you did all the work) Shhh don't tell Sal haha!
Sealed in its shrink wrap from 1987 Airfix Harrier GR.3, 2 spare fuselage halves and a deep IKEA frame.
My Mrs ended up gluing the fuselage halves in as I couldn't get the correct placement for them.
(Yes dear you did all the work) Shhh don't tell Sal haha!
-
- Modelling Gent and Scholar
- Posts: 4385
- Joined: November 23rd, 2012, 4:20 pm
Re: VTOL SB - 10th December 2017 - 10th December 2018
Looking very smart!
Hoping to return to modelling sometime this year!!
Owner of Marky's Model Emporium since 2013!.
Owner of Marky's Model Emporium since 2013!.
-
- Modelling Gent and Scholar
- Posts: 4385
- Joined: November 23rd, 2012, 4:20 pm
Re: VTOL SB - 10th December 2017 - 10th December 2018
After finishing the decals yesterday I pushed on and got a layer of Hannants flat varnish on her:
I'm not going to tell you that I forgot to remask the canopy and had to clean it with tissue and window cleaner!
I'm gonna put a layer of klear onto the canopy to get a better finish as that's worked very well before when I've made this mistake.
Also this is my first experience with Hannants varnish range and after following the directions on the rear of the bottle they went on beautifully!
I'm not going to tell you that I forgot to remask the canopy and had to clean it with tissue and window cleaner!
I'm gonna put a layer of klear onto the canopy to get a better finish as that's worked very well before when I've made this mistake.
Also this is my first experience with Hannants varnish range and after following the directions on the rear of the bottle they went on beautifully!
-
- Modelling Gent and Scholar
- Posts: 4385
- Joined: November 23rd, 2012, 4:20 pm
- Clashcityrocker
- Modelling Gent and Scholar
- Posts: 10823
- Joined: May 1st, 2011, 12:31 am
- Location: Adelaide. South Australia
Re: VTOL SB - 10th December 2017 - 10th December 2018
That is looking very nice.
Nigel
Nigel
- Old_Tonto
- Modelling Gent and Scholar
- Posts: 8063
- Joined: May 1st, 2011, 7:41 pm
- Location: Middlesbrough, Peoples Republic of Teesside.
Re: VTOL SB - 10th December 2017 - 10th December 2018
Nice load out. Super looking build.
2023 - A:0 B:0 C:0
Current Projects:
East German Air Force (1956-90)
South African Air Force (1958-93)
Current Projects:
East German Air Force (1956-90)
South African Air Force (1958-93)
-
- Modelling Gent and Scholar
- Posts: 4385
- Joined: November 23rd, 2012, 4:20 pm
Re: VTOL SB - 10th December 2017 - 10th December 2018
Thanks lads!
Sorry for not posting much content everyone but quite a lot has been going on lately mainly with my car going back in due to a mess up when our local garage fitted a new clutch, long story short the clutch slipped and fell into the gears and one half of our engine fell out due to them not putting the bolts in the correct places.
And now I'm in trouble at work for not being able to attend for the last 2 days so it's been very fun to say the least!
Anyway I got 5 minutes last night to put a lock of prime onto the sidewinder and mavericks:
I know there's a few fibres on them but I really wasn't willing to risk messing things up so I left them to dry and I'll pick at them tonight.
Sorry for not posting much content everyone but quite a lot has been going on lately mainly with my car going back in due to a mess up when our local garage fitted a new clutch, long story short the clutch slipped and fell into the gears and one half of our engine fell out due to them not putting the bolts in the correct places.
And now I'm in trouble at work for not being able to attend for the last 2 days so it's been very fun to say the least!
Anyway I got 5 minutes last night to put a lock of prime onto the sidewinder and mavericks:
I know there's a few fibres on them but I really wasn't willing to risk messing things up so I left them to dry and I'll pick at them tonight.
-
- Modelling Gent and Scholar
- Posts: 4385
- Joined: November 23rd, 2012, 4:20 pm
- DavidWomby
- Modelling Gent and Scholar
- Posts: 11766
- Joined: May 1st, 2011, 8:09 pm
- Location: Florida, USA
Re: VTOL SB - 10th December 2017 - 10th December 2018
Looks splendid. Nice to see that mould getting built.
David
David
-
- Modelling Gent and Scholar
- Posts: 4385
- Joined: November 23rd, 2012, 4:20 pm
Re: VTOL SB - 10th December 2017 - 10th December 2018
Thanks buddy!
Question of the day:
I wonder what a USMC GAU-12 Gun/Ammo Pod looks like on an RAF Harrier II?
Question of the day:
I wonder what a USMC GAU-12 Gun/Ammo Pod looks like on an RAF Harrier II?