Ernie's Comfy Corner
- Ernie
- The Bug Has Well And Truly Bitten
- Posts: 354
- Joined: May 1st, 2011, 3:09 am
- Location: A small town in New Hampshire
Re: Ernie's Comfy Corner
After a very busy fall, I finally have a chance to get back to the bench, at least for a little bit. Between work, caring for my mother with Alzheimer's, and just plain everyday family stuff (errands, fix this or that, Dr, appointments etc.) I have had precious little time at the bench. And my airbrush compressor crapped out, and while I quickly got a replacement, it was different from the previous ones I had so when I went to set it up I realized it would require new fittings etc. so I sorta put off doing anything else with that as it was kind of far down on the list of things that i needed to spend time on, so.........things just kind of sat in limbo until I could get back to them.
Anyway, I have a fair number of kits that are either in damaged boxes, bagged, or started, which makes said kits inconvenient to store. So I figured in between everything else I would try to finish some of those up and at least get some built and out of the way. So, I started with this old 1/35 DML Puppchen kit.
I had started it (rather hurriedly and badly) a long time ago, so figured it would be a good candidate to get finished up, and also try out a winter white wash finish as it has been along time since I have done one of those. The first thing I decided to do was to thin down the gun shield to a more scale thickness ( ever wonder why it takes me forever to finish something, and I have a stack of unfinished kits.....this might be why), so I first removed the detail from the front of the shield with a razor saw and then sanded it thinner.
I also thought it would be a nice idea to replace the small tiedowns with some ancient etched ones from KMC, these were formed over a piece of Evergreen strip stock before being lost....er glued to the shield.
Then all the detail was added back, including the rivet details with 3d rivet decals. I had some laying around and decided to try them to see how they worked. Ultimately it was a fail as they do not show up well, however they are not the correct scale for the kit so that is not surprising, but I figured I would try it out anyway.
This is how it sat until I got the compressor up and running, so into the paint shop it goes.
Anyway, I have a fair number of kits that are either in damaged boxes, bagged, or started, which makes said kits inconvenient to store. So I figured in between everything else I would try to finish some of those up and at least get some built and out of the way. So, I started with this old 1/35 DML Puppchen kit.
I had started it (rather hurriedly and badly) a long time ago, so figured it would be a good candidate to get finished up, and also try out a winter white wash finish as it has been along time since I have done one of those. The first thing I decided to do was to thin down the gun shield to a more scale thickness ( ever wonder why it takes me forever to finish something, and I have a stack of unfinished kits.....this might be why), so I first removed the detail from the front of the shield with a razor saw and then sanded it thinner.
I also thought it would be a nice idea to replace the small tiedowns with some ancient etched ones from KMC, these were formed over a piece of Evergreen strip stock before being lost....er glued to the shield.
Then all the detail was added back, including the rivet details with 3d rivet decals. I had some laying around and decided to try them to see how they worked. Ultimately it was a fail as they do not show up well, however they are not the correct scale for the kit so that is not surprising, but I figured I would try it out anyway.
This is how it sat until I got the compressor up and running, so into the paint shop it goes.
- iggie
- Modelling Gent and Scholar
- Posts: 23438
- Joined: July 31st, 2013, 11:04 am
- Location: North Somercotes, Lincolnshire
- Contact:
Re: Ernie's Comfy Corner
Good to see you back again Ernie
The gun shield additions look really good and will look even more so under some paint I suspect
The gun shield additions look really good and will look even more so under some paint I suspect
Best wishes
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
- Ernie
- The Bug Has Well And Truly Bitten
- Posts: 354
- Joined: May 1st, 2011, 3:09 am
- Location: A small town in New Hampshire
Re: Ernie's Comfy Corner
Thank you, it is nice to finally have a little time to get to the work bench again! Hopefully it will be sustainable for the foreseeable future!
-
- NOT the sheep
- Posts: 26188
- Joined: November 26th, 2011, 6:11 pm
- Location: Pontefract West Yorkshire
Re: Ernie's Comfy Corner
It's good to see you back in action, Ernie, the Puppchen is a great subject and is coming long very nicely with some great detailing on the shield.
Doing - Tamiya 1/35th Universal Carrier.
Work is the curse of the modelling classes!
IPMS#12300
Work is the curse of the modelling classes!
IPMS#12300
- Ernie
- The Bug Has Well And Truly Bitten
- Posts: 354
- Joined: May 1st, 2011, 3:09 am
- Location: A small town in New Hampshire
Re: Ernie's Comfy Corner
Thank you Shaun, the Puppchen is a fun little kit, and it is allowing me to try out a few different techniques that I can build on and use on other projects.ShaunW wrote:It's good to see you back in action, Ernie, the Puppchen is a great subject and is coming long very nicely with some great detailing on the shield.
-
- Modelling Gent and Scholar
- Posts: 5345
- Joined: April 1st, 2013, 6:45 pm
Re: Ernie's Comfy Corner
Those extra details may have taken time but they certainly enhance the model. Good luck with the painting!
- Ernie
- The Bug Has Well And Truly Bitten
- Posts: 354
- Joined: May 1st, 2011, 3:09 am
- Location: A small town in New Hampshire
Re: Ernie's Comfy Corner
Thank you, the shield is the single most detailed part in the whole kit, so while it took some time, I think the extra work will improve the overall "look" of the model in the end as it is such a visible part of it.Lone Modeller wrote:Those extra details may have taken time but they certainly enhance the model. Good luck with the painting!
The base coat of dark yellow applied, using Tamiya XF-60 lightened bit with Deck Tan.
I plan on using two different methods for the white wash finish. The first is covering the model with a layer of chipping fluid and then overspray that with Tamiya flat white. After chipping and scrubbing some of that off, I will use Mig's Washable White paint to give a more faded out white finish. So the chipping fluid was applied, left to dry then the Tamiya white was sprayed.
- PaulBradley
- Staring out the window
- Posts: 21220
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: Ernie's Comfy Corner
Weird-looking little machine!
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
- Softscience
- Staring out the window
- Posts: 7491
- Joined: April 5th, 2011, 4:34 pm
- Location: Maryland, near Washington DC
Re: Ernie's Comfy Corner
That's a neat little thing, and a nicely built model.
I like all the oddities you've presented in this thread. All of them expertly built!
I like all the oddities you've presented in this thread. All of them expertly built!
- Ernie
- The Bug Has Well And Truly Bitten
- Posts: 354
- Joined: May 1st, 2011, 3:09 am
- Location: A small town in New Hampshire
Re: Ernie's Comfy Corner
Thank you Ralph, glad you like my little collection of oddities!Softscience wrote:That's a neat little thing, and a nicely built model.
I like all the oddities you've presented in this thread. All of them expertly built!
- Ernie
- The Bug Has Well And Truly Bitten
- Posts: 354
- Joined: May 1st, 2011, 3:09 am
- Location: A small town in New Hampshire
Re: Ernie's Comfy Corner
I have also worked on the ammo crates that came with the kit as I intend to display them on a small base with the gun. I found a YouTube video of a very talented model railroader who had a video of painting plastic to look like wood. It seemed simple enough to do, and uses acrylic craft paint which is quite inexpensive compared to some of our specialty paints, so I decided to give it a try, The boxes were first textured with a saw blade then painted.
The boxes got a coat of gloss, some hair spray and the a coat of Gunze Aqueous dark green from a 30 year old bottle Then they were stippled around the edges with a couple different shades of lighter greens to show wear and chipping. Once all that was dry the decal was applied. I was quite surprised the decals worked, as you might be able to see they suffered some moisture damage while in storage. However, it took some work to get it to settle down. I have read that Tamiya Extra Thin Cement can be used to melt down stubborn decals. Well, it is a thing, I resorted to that to finally get the decal settle down onto the ammo box perfectly! Some of the paint was scrubbed and rubbed off to expose the underlying wood grain.
In all contemporary photos of the shells I looked at the shells were a very dark color, with a very slight sheen, I base coated the shells with Vallejo Grey Black. I thought it looked a too light. Looking around I spied a bottle of Wilder Products diesel exhaust stains wash. This is a very very dark greyish sooty looking wash, which I applied to the shells and it kind of gave me the look I was going for. After that dried I rubbed the shells with a dark metallic pigment, dark steel I think it was? Anyway it gave the shells a slight sheen and metallic look.
Getting closer...
The boxes got a coat of gloss, some hair spray and the a coat of Gunze Aqueous dark green from a 30 year old bottle Then they were stippled around the edges with a couple different shades of lighter greens to show wear and chipping. Once all that was dry the decal was applied. I was quite surprised the decals worked, as you might be able to see they suffered some moisture damage while in storage. However, it took some work to get it to settle down. I have read that Tamiya Extra Thin Cement can be used to melt down stubborn decals. Well, it is a thing, I resorted to that to finally get the decal settle down onto the ammo box perfectly! Some of the paint was scrubbed and rubbed off to expose the underlying wood grain.
In all contemporary photos of the shells I looked at the shells were a very dark color, with a very slight sheen, I base coated the shells with Vallejo Grey Black. I thought it looked a too light. Looking around I spied a bottle of Wilder Products diesel exhaust stains wash. This is a very very dark greyish sooty looking wash, which I applied to the shells and it kind of gave me the look I was going for. After that dried I rubbed the shells with a dark metallic pigment, dark steel I think it was? Anyway it gave the shells a slight sheen and metallic look.
Getting closer...
-
- Modelling Gent and Scholar
- Posts: 5345
- Joined: April 1st, 2013, 6:45 pm
Re: Ernie's Comfy Corner
Some excellent painting there Ernie. The wood looks very realistic, as do the shells.
- skypirate
- Modelling Gent and Scholar
- Posts: 7303
- Joined: May 1st, 2011, 6:13 am
- Location: Port Macquarie, Australia
Re: Ernie's Comfy Corner
Love the extra details! Sure makes a difference!
David
David
Re: Ernie's Comfy Corner
The boxes look very realistic, I'm afraid my knowledge of shell colours is none existent to be able to say if the colours are accurate.
It's only pain, work through it.
- gnomemeansgnome
- Modelling Gent and Scholar
- Posts: 5269
- Joined: July 16th, 2013, 4:03 pm
- Location: No Fun City
Re: Ernie's Comfy Corner
Cool!
Ego no habeo consilium.
ICBM = Insatiable Collector and Builder of Models
ICBM = Insatiable Collector and Builder of Models