Jeff’s Heavy Industries
Re: Jeff’s Heavy Industries
What did we learn today. Decaling goes much better without boarding steps in the way.
Besting 60 years of mediocre building of average kits in the stand off scale
- B4en
- Modelling Gent and Scholar
- Posts: 1145
- Joined: February 8th, 2014, 9:58 am
- Location: South Yorkshire
Re: Jeff’s Heavy Industries
One of those special modelling joys!
The past, present, and future walked into a bar. It was tense.
- iggie
- Modelling Gent and Scholar
- Posts: 23438
- Joined: July 31st, 2013, 11:04 am
- Location: North Somercotes, Lincolnshire
- Contact:
Re: Jeff’s Heavy Industries
Hindsight, the perfect science...
Best wishes
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Re: Jeff’s Heavy Industries
Welp! Calling this one done. Fought me to the end and even considered binning it. But laying it aside once in a while helped me out.
Besting 60 years of mediocre building of average kits in the stand off scale
Re: Jeff’s Heavy Industries
Next on the bench is the Airfix Eindecker. Member of my local band of pirates loaned me much material. Decided to stay with the basics.
Besting 60 years of mediocre building of average kits in the stand off scale
- iggie
- Modelling Gent and Scholar
- Posts: 23438
- Joined: July 31st, 2013, 11:04 am
- Location: North Somercotes, Lincolnshire
- Contact:
Re: Jeff’s Heavy Industries
Nice work on the Cobra Jeff, despite the odd issues, it looks great
Best wishes
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
-
- Is His Name Really Howard?
- Posts: 2217
- Joined: September 22nd, 2011, 4:40 pm
- Location: Wolverhampton
Re: Jeff’s Heavy Industries
The cobra is very good, well worth the wait
Cheers Howard
Cheers Howard
acquired 1
Built 2
Disposed none
On the bench. Airfix Handley Page 0/400 , Escadron Hunting Percival Pembroke
Built 2
Disposed none
On the bench. Airfix Handley Page 0/400 , Escadron Hunting Percival Pembroke
- Softscience
- Staring out the window
- Posts: 7491
- Joined: April 5th, 2011, 4:34 pm
- Location: Maryland, near Washington DC
Re: Jeff’s Heavy Industries
I love the cobra, Jeff. It looks monochrome at first glance, but then really rewards a longer look with all of its many curves and bumps. Really nice job.
I'm eager to see what you achieve with the eindecker.
I'm eager to see what you achieve with the eindecker.
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19451
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Jeff’s Heavy Industries
Loving the Cobra Jeff - nice work!
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
- B4en
- Modelling Gent and Scholar
- Posts: 1145
- Joined: February 8th, 2014, 9:58 am
- Location: South Yorkshire
Re: Jeff’s Heavy Industries
The Cobra came out great Jeff! Looking forward to the little Fokker. I've never built the Airfix one - it looks like a good kit.
The past, present, and future walked into a bar. It was tense.
Re: Jeff’s Heavy Industries
Limited time on the bench last couple days but got some interior stuff done. Using Wingnut Wings instruction sheet for a little guidance.
Holes drilled in wings for eventual rigging. The silver square in the lower corner is to practice a burnish effect for the cowling. Any thoughts and ideas appreciated.
Holes drilled in wings for eventual rigging. The silver square in the lower corner is to practice a burnish effect for the cowling. Any thoughts and ideas appreciated.
Besting 60 years of mediocre building of average kits in the stand off scale
- B4en
- Modelling Gent and Scholar
- Posts: 1145
- Joined: February 8th, 2014, 9:58 am
- Location: South Yorkshire
Re: Jeff’s Heavy Industries
That does look nice.
I'm not sure how you'd go about burnishing paint? A very light touch would be needed, maybe mix the top layer of paint with some other medium to harden it up first? I use a very soft brush for buffing both enamels and acrylics but it sounds like you're after a different effect.
I'm not sure how you'd go about burnishing paint? A very light touch would be needed, maybe mix the top layer of paint with some other medium to harden it up first? I use a very soft brush for buffing both enamels and acrylics but it sounds like you're after a different effect.
The past, present, and future walked into a bar. It was tense.
Re: Jeff’s Heavy Industries
I can clarify I think. In 1/72 scale I’m going after visual appearance rather than texture. Right now I am experimenting with steel color swirls over a base of aluminum.
Besting 60 years of mediocre building of average kits in the stand off scale
- B4en
- Modelling Gent and Scholar
- Posts: 1145
- Joined: February 8th, 2014, 9:58 am
- Location: South Yorkshire
Re: Jeff’s Heavy Industries
I thought that was probably what you were after Jeff. It might be easier to do the texture on the plastic and then let the paint bring it out. How about trying a tiny bit of fine sandpaper glued to the blunt end of a mini drill bit? I haven't tried this but I have one of these Eindekkers in the stash so I may give it a go at some point. Plenty of practice first of course before hitting the kit plastic...
The past, present, and future walked into a bar. It was tense.